(5 customer reviews)



Shooters Gun Store Shooters knows it all starts with the right Rifle Brass. Check out our current selection of 6.5 Grendel Rifle Brass

 In Stock

242 in stock

large rifle vs small rifle brass 6.5 grendel

Large rifle brass and small rifle brass are two different types of rifle brass that are designed for use in different types of firearms. Large rifle brass is typically used in large-caliber rifles, such as those used in hunting and military applications, while small rifle brass is typically used in small-caliber rifles, such as those used in target shooting and sporting. 6.5 GRENDEL RIFLE BRASS

In terms of 6.5 Grendel, both large rifle and small rifle brass can be used, but it depends on the specific application. For example, large rifle brass may be used in a hunting rifle that is chambered in 6.5 Grendel, while small rifle brass may be used in a target shooting rifle that is chambered in 6.5 Grendel.

It’s important to note that the use of reloading equipment and components, including rifle brass, carries significant risks and should only be done by individuals who are properly trained and licensed to do so. It’s important to always prioritize safety when handling reloading equipment and components, and to consult with a professional or follow the manufacturer’s instructions when using large rifle or small rifle brass for 6.5 Grendel.

It’s also worth mentioning that 6.5 Grendel is a cartridge that was developed for hunting and target shooting, and it’s known for its high accuracy and stopping power. 6.5 Grendel brass is a popular choice for reloaders who want to load their own cartridges for this cartridge. The choice of large rifle or small rifle brass will depend on the specific application and the preference of the reloader.

Starline Unprimed Rifle Brass 6.5 Grendel 500 Count
by Starline Brass

Midsouth is proud to offer Starline Unprimed Rifle Brass 6.5 Grendel in a convenient 500 Count. Starline cartridge cases are well known for their exceptional quality and construction. Starline Brass 6.5 Grendel

Using detailed build procedures for the 6.5 Grendel unprimed brass ensures higher concentricity in each case that will ease bullet seating and round seating in your chamber. Our 6.5 Grendel Brass cases also ensure very tight tolerances in their case wall thickness to produce the most accurate ammunition possible. Starline’s unique case creation allows the user more reloads and guarantees virtually identical cases from lot to lot.


The 6.5 Grendel unprimed brass is very consistent and will make reloading a simple and easy task. No more hours of trimming and sizing, thanks to the steps Starline takes to ensure the rifle brass is correct when it leaves the factory. Starline Unprimed Rifle Brass

Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.

Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled. 6.5 grendel brass

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them.  Nickel plating is harder than brass and the cases require more effort in sizing.  In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.

Specifications and Features::

  • Tight tolerances for concentricity
  • Controlled wall thickness
  • Correct sizes lot to lot
  • Small Rifle Primer

5 reviews for 6.5 GRENDEL RIFLE BRASS

  1. Jacks Booher

    Good ammo at a good price with fast shipping

  2. Douglas primes

    My order was processed very quickly and shipped in a very reasonable timeframe. The shipment arrived in excellent condition. I just got home from the range and burned through 100 rounds (TulAmmo .45ACP) and starline brass without a single FTF. Will absolutely return to Opticsammunitionshop when it’s time to re-stock without a second thought.”

  3. Donald Dilly

    Optics Ammunition Shop had a starline brass at a good price when no one else did and the made sure I got my order delivered to me Thank you

  4. Davidson pete

    Great website for ammo, good prices and came quick

  5. Steve Cudd

    Good prices. Fast shipping! I’ll definitely shop here again!

Only logged in customers who have purchased this product may leave a review.